STIHL MS 261 C-MQ Professional Chainsaw

Stihl
$1,649.00
Current Stock:
SKU:
MS261C-MQ
Availability:
In Stock

 

STIHL MS 261 C-MQ Professional Chainsaw

The MS 261 C-MQ is a rugged all-rounder equipped with STIHL's environmentally friendly 2-MIX engine technology for less fuel consumption and less emission and outstanding cutting performance. Fitted-standard with QuickStop Super chain brake. The new MS 261 C-MQ is fitted with STIHL's M-TRONIC electronic engine management system which enables the saw to automatically adjust to varying fuel grades, changes in altitude and temperature and makes starting this saw easier than ever before, simply push the start lever to the on position and pull. The new MS 261 C-MQ has taken performance to a new level.

 

Technical data

Displacment cc 50.2
Power output kW/bhp 2.9/3.9
Weight kg 5.2

 

Standard features

 
Captive bar nuts

Captive bar nuts

Bar nuts held captive in the sprocket cover will not get lost when changing over the cutting attachment.

 
STIHL M-Tronic (M)

STIHL M-Tronic (M)

This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

 

 STIHL 2-MIX Engine
 

STIHL 2-MIX Engine

The new 2-MIX engine features an advanced stratified charge system that boosts power, whilst reducing consumption and pollution, significantly lowering unburned hydrocarbons in the exhaust. The result is a cleaner, more fuel efficient engine.

 

Advanced combustion technology

 

Advanced combustion technology

Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result: lower consumption and high torque across a broad rpm range.

 

Pre-separation air filtration system

 

Pre-separation air filtration system

The innovative long-life air filter system greatly extends the service life of the filter. Air routing removes larger particles of dirt, meaning the actual filter has less to do. So the saw can be used for longer without having to clean the filter.

 

Anti-vibration system

 

Anti-vibration system

Intense vibration at the handles of power tools can lead to longer-term effects of blood vessels in the hands and arms. STIHL have therefore developed an effective anti-vibration system where by the oscillations from the machines engine are dampened which significantly reduces vibrations at the handles.

 

STIHL ElastoStart
 

STIHL ElastoStart

STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the users joints and muscles through a spring or rubber element in the starter handle.

 

Tool free filler caps
 

Tool free filler caps

Special caps on the fuel and oil tanks are designed for easy opening and locking without the need for tools.

 

Decompression valve
 

Decompression valve

The decompression valve is part of the easy start-system. The valve should be pressed before starting in order to reduce the compression pressure when starting, as well as the effort needed to pull the starter rope. The decompression valve is semi-automatic, meaning that it must be pressed manually before starting, but then closes automatically.

 

Compensator
 

Compensator

This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

 

STIHL Ematic-System
 

STIHL Ematic-System

The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption up to 50%.

 

Side chain tensioner
 

Side chain tensioner

The tensioning screw is located on the side of the chain saw through the sprocket cover. Chain side tensioning allows the saw chain to be retensioned effortlessly, avoiding any contact with the sharp chain.

 

Variable-displacement oil pump
 

Variable-displacement oil pump

The exact chain oil output can be adjusted maunally for varying conditions, allowing for a reduction of up to 50%.

 

 

Accessories

 
Chain saw Case

Chain saw Case

Made of durable plastic. For safe storage and transportation of petrol and electric chain saw models: MS 170, 171, 181, 201 T, 192 C-E, 211, 230, 231, 251, 240 C-M, 250, 261, 362, MSE 140, 180, (not MSE-C versions). Not suitable for MS 441.

Versions : Chain saw carry case

Price : $79.00

 

Multi-Functional Tool
 

Multi-Functional Tool

Practical, multifunctional quality tool in a sturdy plastic case with both a 3.5 mm (for carburetor adjustments and cleaning grooves) and 7.0 mm slotted screwdriver. Torx blade TX27 and 19-13 and 19-16 spark plug wrenches. Includes a nylon bag and belt loop.

Versions : For all MS models except MS 171, 181, 211, 192 C-E

Price : $59.00

 

Filing Vice - S 260
 

Filing Vice - S 260

Lightweight and convenient design. Easy to drive into the wood and fix the guide bar. Includes practical belt bag.

Versions : Field Stump Vice - S 260

Price : $35.00

 

Filing Vice - L 700
 

Filing Vice - L 700

Large and robust design. Can be easily driven into the wood.

Versions : Field Stump Vice

Price : $49.00